Installation:
The product should be applied at the recommended temperature. When exposed to a temperature higher than the recommended maximum temperature of 50°C, the plates may soften, permanently deform, change their size, thin and lose their mechanical properties.
The product should be glued only with cement adhesives or polyurethane foam-glue and fixed with plastic dowels.
The glue must not contain chemically soluble substances that can react with the plates in such a way as to soften them, cause shrinkage and even dissolution, which can lead to the loss of the main properties.
The product is installed in accordance with the general rules for performing thermal insulation works in construction.
The price is per square meter.
The product should be applied at the recommended temperature. When exposed to a temperature higher than the recommended maximum temperature of 50°C, the plates may soften, permanently deform, change their size, thin and lose their mechanical properties.
The product should be glued only with cement adhesives or polyurethane foam-glue and fixed with plastic dowels.
The glue must not contain chemically soluble substances that can react with the plates in such a way as to soften them, cause shrinkage and even dissolution, which can lead to the loss of the main properties.
The product is installed in accordance with the general rules for performing thermal insulation works in construction.
The price is per square meter.
