Angle grinders

Power: 570W
Idle speed: 11,000min¯¹
Disc size: 115mm
Spindle size: M14x2mm
Dimensions (LxWxH): 270x129x105mm
Weight: 2kg

Power: 570W
Idle speed: 11,000 min¯¹
Disc size: 125mm
Spindle size: M14x2mm
Dimensions (LxWxH): 270x139x105mm
Weight: 2kg

Power: 570W
Revolutions: 11,000 min-¹
Disc diameter: 115mm
Weight: 1,9kg

Power: 720W
Idle speed: 11,000rpm
Grip size: M14
Inner hole size: 22,23mm
Disc diameter: Ø 125mm
Noise: sound pressure: 85dB(A)
Noise: sound power: 96dB(A)
Noise: Deviation: 3dB(A)
Vibrations: grinding: 7.5m/s²
Vibrations: grinding: 2.5m/s²
Vibration: deflection (K): 1.5m/s²
Dimensions: 266x128x103mm
Weight: 1,8kg

Power: 720W
Idle speed: 11,000 min-1
Grip size: M14
Bore size: 22,23mm
Disc diameter: Ø125mm
Noise: sound pressure: 88,0dB(A)
Noise: sound power: 96,0dB(A)
Noise: Deviation: 3,0dB(A)
Vibrations: sanding: 8,5m/s²
Vibrations: sanding: 2,5m/s²
Vibrations: deviation: 1,5m/s²
Dimensions (LxWxH): 266x140x108mm
Weight: 1.9kg

Technical parameters:

Voltage: 220V/50Hz
Power: 750W
Spindle thread: M14
Disc diameter: Ø125mm
Idle speed: 11000rpm
Power cable length: 2m
Weight: 2,1kg

Nominal power consumption: 750W
Idle speed: 2,800-11,000 rpm
Disc diameter: 125mm
Spindle thread: M14
Tool dimensions (width): 73mm
Tool dimensions (length): 270mm
Tool dimensions (height): 100mm
Weight: 1,5kg

Nominal power consumption: 750W
Idle speed: 2,800 - 11,000 rpm
Disc diameter: 125mm
Spindle thread: M14
Tool dimensions (width): 73mm
Tool dimensions (length): 270mm
Tool dimensions (height): 100mm
Weight: 1,5kg

Technical parameters:

Power: 800W
Disc diameter: 125mm
Voltage/Frequency: 230V/50Hz
Idle speed: 11800rpm
Weight: 1.800kg

Rated power: 840W
Idle speed: 11000 min-¹   
Grinding disc diameter: 125mm
Spindle thread: M14x2
Weight: 2,1kg

Power: 840W
Idle speed: 11,000min1
Disc diameter: Ø 115mm
Inner diameter: 22,23mm
Noise: sound pressure: 86dB(A)
Noise: sound power: 97dB(A)
Noise: Deviation: 3dB(A)
Vibration: grinding: 7,5m/s²
Vibration: deflection (K): 1,5m/s²
Weight: 2,4kg

Power: 840W
Idle speed: 11000min-1
Spindle thread: M14x2
Disc diameter: F125mm
Possibility of replacing the brushes from the outside - without disassembly
Dimensions (LxWxH): 266x128x103mm
Weight: 1,6kg

Power: 840W
Idle speed: 11,000 min-1
Grip size: M14
Bore size: 22.23mm
Disc diameter: Ø125mm
Noise: sound pressure: 89.0dB(A)
Noise: sound power: 97.0dB(A)
Noise: Deviation: 3.0dB(A)
Vibrations: sanding: 8.5m/s²
Vibrations: sanding: 2.5m/s²
Vibrations: deviation: 1.5m/s²
Dimensions (LxWxH): 271x139x106mm
Weight: 3.2kg

Rated power: 850W
Outer diameter of the disk: 125mm
Power: Mains
Supply voltage: 230V/50Hz
Output power: 450W
Maximum revolutions without load: 12000 min-1
Spindle thread: M14
Shaft lock: Yes
Weight: 1,840kg

Power: 900W
Idle speed: 2800-11000 min-1
Disc diameter: 125mm
Grip size: M14
Bore size: 22,23mm
Noise: 93dB
Dimensions (LxWxH): 295x115x190mm
Weight: 2,06kg

Rated power: 900W
Disc diameter: 125mm
Idle speed: 11000rpm.
Spindle thread: M14
Weight: 1.8kg

Power: 900W
Idle speed: 11800 minˉ¹
Max. diam. of the disk: 125mm
Spindle thread: M14
Weight: 2.05kg

Technical parameters:

Power: 900W
Voltage: 230V
Disc diameter: 125mm
Idle speed: 12000rpm
Weight: 1,800kg

Power: 1050W
Idle revolutions: 10,000 min -1
Grip size: M14
Size of internal bore: 2223mm
Disc diameter Ø: 150mm
Noise: sound pressure: 89dB(A)
Noise: sound power: 100dB(A)
Noise: Deviation: 3dB(A)
Vibration: grinding: 65m/s2
Vibration: grinding: 25m/s2
Vibration: deflection (K): 15m/s2
Dimensions (LxWxH): 384x172x120mm
Weight (EPTA): 2,2kg

Technical parameters:

Power: 1100W
Disc size: 150mm
Speed: 0-12000rpm
Weight: 2.1kg

Nominal voltage: 220V/50Hz
Power: 1100W
Maximum speed: 11000rpm
Disc size: 125mm
Spindle thread: M14
Weight: 2.10kg

Nominal voltage: 220V/50Hz
Power: 1100W
Power consumption: 860W
Maximum speed: 11000rpm
Disc size: 125mm
Spindle thread: M14
Weight: 2.40kg

Power: 1200W
Idle speed: 11,000rpm
Disc diameter: 125mm
Spindle thread: M14
Noise level: 93dB(A)
Value of vibration emissions ah for rough grinding: 5.9m/s²
Dimensions (LxHxW): 301x108x265mm
Weight: 2.2kg

Technical parameters:

Power: 1200W
Disc diameter: 125mm
Idle speed: 11000rpm
Spindle thread: M14
Weight: 3.114kg

Technical parameters:

Power: 1400W
Disc diameter: 125mm
Idle speed: 11500rpm
Weight: 3,110kg

Power: 1400W
Idle speed: 12000rpm
Grinding disc diameter: 125mm
Spindle thread: M14x2mm
Weight: 3,6kg

Nominal power consumption: 1,400W
Idle speed: 11,000 min-1
Output power: 820W
Spindle thread: M14
Disc Ø: 125mm
Rubber sanding disc, Ø: 125mm
Cup-shaped brush, Ø: 70mm
Length: 298mm
Height: 102mm
Weight: 2.2kg
Inrush current limit
Constant-Electronic
Anti-rotation protective housing

Nominal power consumption: 1500W
Idle speed: 2800–11500 min-1
Output power: 820W
Spindle thread: M14
Disc, Ø: 125mm
Rubber sanding disc, Ø: 125mm
Cup-shaped brush, Ø: 75mm
Length: 311mm
Height: 103mm

Power: 1700W
Disc diameter: 125mm
Anti-vibration system: yes
Speed ​​control: yes
Constant electronics: yes
Overload protection: yes
Soft start: yes
Model: GWS 17-125 CIE
Speeds without load: 2800-11500rpm
Protection against reactivation: yes
Weight: 2,4kg

Nominal power consumption: 1700W
Idle speed: 11,500 min-1
Disc Ø: 125mm
Output power: 1010W
Spindle thread: M14
Rubber sanding disc, Ø: 125mm
Cup-shaped brush, Ø: 75mm
Switch: Lockable switch

Nominal power consumption: 1,700W
Idle speed: 11,500 min-1
Spindle thread: M14
Main Grip: Barrel
Disc Ø: 125mm
Hole: Ø 22,2mm
Tool dimensions (length): 327x265x108mm
Switch: Lockable switch
Noise level: 95dB(A)
Sound power level: 103dB(A)
Impairment K: 3dB
Weight: 2,2kg

Idle speed: 2,800 – 11,500 min-1
Disc Ø: 125mm
Voltage, electrical: 230V
Spindle thread: M14
Main Grip: Barrel
Hole, Ø: 22,23mm
Weight: 2,2kg
Switch: Lockable switch

Nominal power consumption: 1900W
Output power: 1170W
Grinding disc Ø: 230mm
Idle speed: 6500rpm
Machine weight: 4,4kg

Technical parameters:

Power: 2000W
Disc diameter: 230mm
Idle speed: 6500rpm
Weight: 7,500kg

Power: 2000W
Idle speed: 6,600 min-1
Bore size: 22.23mm
Disc diameter: Ø230mm
Noise: sound pressure: 97.0dB(A)
Noise: sound power: 105.0dB(A)
Noise: Deviation: 3.0dB(A)
Vibrations: sanding: 5.5m/s²
Vibrations: sanding: 2.5m/s²
Vibrations: deviation: 1.5m/s²
Dimensions (LxWxH): 432x250x132mm
Weight: 4.7kg

Power: 2000W
Idle speed: 6,600 min¯¹
Disc size: 230mm
Spindle size: M14x2mm
Dimensions (LxWxH): 466x250x138mm
Weight: 5.7kg

Nominal power consumption: 2200W
Idle speed: 6,500rpm
Spindle thread: M14
Disc diameter: 230mm
Switch: PROtection switch
Noise level: 104dB(A)
Sound power level: 93dB(A)
Impairment, K: 3dB
Width: 110mm
Length: 475mm
Height: 140mm
Weight: 5.4kg

Power: 2200W
Idle speed: 6600rpm
Grip size: M14
Inner hole size: 22,23mm
Disc diameter Ø: 230mm
Noise: sound pressure: 89dB(A)
Noise: sound power: 100dB(A)
Noise: Deviation: 3dB(A)
Vibrations: grinding: 5.5m/s²
Vibrations: grinding: 2.5m/s²
Vibration: deflection: (K) 1.5m/s²
Dimensions (LxWxH): 473x249x140mm
Weight: 5.8kg

Power: 2.200W
Idle RPM: 6.600 min-1
Grip size: M14
Internal hole size: 22,23mm
Disc diameter: Ø230 mm
Noise: sound pressure: 92,0dB(A)
Noise: sound power: 100,0dB(A)
Noise: deviation: 3,0dB(A)
Vibrations: grinding: 5,5m/s²
Vibrations: grinding: 2,5m/s²
Vibration: deflection: 1,5m/s²
Dimensions(LxWxH): 473x249x140mm
Weight: 5,8kg

Power: 2200W
Idle speed: 8500 min-1
Disc diameter: 180mm
Grip size: M14
Bore size: 22,23mm
Noise: 89dB
Dimensions (LxWxH): 473x200x140mm
Weight: 5,5kg

Technical parameters:

Brand: PROCRAFT
Model: PW2300
Power: 2300W
Idle speed: 6000rpm
Voltage: 220/50Hz
Diameter of the working disk: 230mm
Weight: 5kg

Technical parameters:

Power, W: 2550
Disc diameter, mm: 230
Net/gross weight, kg: 3.5
Supply voltage: 220
Maintaining a constant number of revolutions under load:-
Smooth start: +
Idle RPM: 6000
Speed control : -

Technical parameters:

Voltage: 230V/50Hz
Power: 2600W
Spindle thread: M14
Disc diameter: Ø 230mm
Idle speed: 6500rpm
Power cable length: 2m
Weight: 6.7kg

Technical parameters:

Power: 2650W
Nominal voltage: 220V, 50Hz
Rotation speed: 7500rpm
Disc diameter: 230mm
Cable length: 2m
Spindle thread: M14
Weight: 7kg