Welding consumables and accessories

Work cycle: 60%
Load capacity: 350A DC 250A AC
Length (m): 4 / 8 / 12 m
Cooling type: Liquid
Diameter Ø: 0.5 - 4.0 mm
Flow rate of protective gas: 7 - 15 l/min
LW/LP plug size: 50 - outer diameter 13 mm
Connection thread: nut 1/4" internal thread
Weight: 2,460 kg

Burner body type: with valve
Connector size ŁW/ŁP: ​​35/50
Work cycle AC 35%: 125 A
Work cycle DC 35%: 140 A
Range of electrode diameters / electrode length: 1.0 to 4.0mm / 175mm
Flow rate of protective gas: 10 – 20 l/min
Cooling type: protective gas
Length: 4 m
Nominal Cassette/Cable/Handle Length: 4m
Weight: 1,920 kg

Diameter of bodies Ø: 1.0 - 1.6 mm
Type of cooling: Water
Weight: 1,000 kg

Diameter of bodies Ø:0.8 - 1.2 mm
Type of cooling: Air
Weight: 1,000 kg

Welding current at duty cycle DC 60%: 230 A CO2
Diameter of bodies: Ø0.6 – 1.2mm
Type of cooling: Shielding gas
Flow rate of protective gas: 10 – 18 l/min
Length (m): 3 to 5m
Weight: 1,500 kg

Diameter of bodies Ø:0.8 - 1.2 mm
Type of cooling: Air
Weight: 1,000 kg

Welding current at duty cycle DC 60%: 180 A CO2 - 150 A mixed gas
Diameter of bodies Ø: 0.6 – 1.2 mm
Type of cooling: Shielding gas
Flow rate of protective gas: 10 – 18 l/min
Length (m): 3 to 5m
MIG/MAG duty cycle: 60%
Weight: 1,500 kg

Предназначение: за горелка МИГ-25
Материал: стоманена сплав
Височина на спиралата: 14mm

Conical gas nozzle for hoses

Conical gas nozzle with Ø16mm

Conical gas nozzle with Ø15mm

Conical gas nozzle with Ø12.5mm

Connection: thread M6 mm.
Length: 25 mm.
For use with welding wire with a diameter of Ø 0.6, Ø 0.8 and Ø 1.0 mm

Connection: thread M6 mm.
Length: 28 mm.
For use with welding wire with a diameter of Ø 0.8, Ø 1.0 and Ø 1.2 mm

Connection: thread M8 mm.
Length: 30 mm.
For use with welding wire with a diameter of Ø 0.8, Ø 1.0, Ø 1.2 и Ø 1.6 mm

The ceramic tip is a spare part of the liquid or gas cooled TIG torch.

The ceramic tip is a spare part of the liquid or gas cooled TIG torch.

The ceramic tip is a spare part of the liquid or gas cooled TIG torch.

The ceramic tip is a spare part of the liquid or gas cooled TIG torch.

The ceramic tip is a spare part of the liquid or gas cooled TIG torch.

The ceramic tip is a spare part of the liquid or gas cooled TIG torch.

The ceramic tip is a spare part of the liquid or gas cooled TIG torch.

The ceramic tip is a spare part of the gas-cooled TIG torch.

The ceramic tip is a spare part of the gas-cooled TIG torch.

The ceramic tip is a spare part of the gas-cooled TIG torch.

The ceramic tip is a spare part of the gas-cooled TIG torch.

The lead wire is coated - ф1.2-1.6mm, yellow color.

The lead wire is coated - Ф1.0-1.2mm, red color.

The lead wire is coated - ф0.6-0.8mm, blue color.

Application aluminum, stainless and bronze wires.
ф1.2-1.6mm

Application aluminum, stainless and bronze wires.
Ф1.0-1.2mm

Application aluminum, stainless and bronze wires.
ф0.6-0.8mm

Quick connection for connecting the cables to the electric

Quick connection to connect the cables to an electrical

50-70mm - Made of brass; weight 150 g. For cable from 50mm² to 70mm². Maximum current - 500A
70-95mm - Made of brass; weight 200 g. For cable from 70mm² to 95mm². Maximum current - 600A

A quick connection for connecting the cables to an electromagnet, or serves to extend the cables.

A quick connection for connecting the cables to an electromagnet, or serves to extend the cables.

Cap for TIG burners

Cap for TIG burners

Collet for TIG torch, for tungsten electrode.

Material: brass
Working pressure: 0-16 bar
Operating temperature: -15 C +80 C

Material: brass
Working pressure: 0-16 bar
Operating temperature: -15 C +80 C

Connection socket with internal inch thread. Made of brass.
The thread of the spigot is internal inch.

Used for compressed air. The material they are made of is brass.

Quick connect coupling

Quick coupler for connecting air and water lines with a quick coupler plug.

Material: galvanized steel

Load: 200/300/500 A

Contact jaws connected to a shunt of multi-core braided cable

Material: galvanized steel

Load: 300/500 A

Contact jaws connected to a shunt of multi-core braided cable

Material: brass

Load: 300A

Material: brass

Load: 150A/300A/400 - 500A

Material: brass

Load: 600A

Possibility of mounting the holder on any steel surface due to the magnesium

Magnetic stand for TIG torch

Diameter of the axis 51mm

The welding filters are designed with high optical quality, including
uniform dimming and minimal distortion of the entire visual filter area.

Clear protective coating provides visibility and protection when welding.

The welding filters are designed with high optical quality, including
uniform dimming and minimal distortion of the entire visual filter area.

Clear protective coating provides visibility and protection when welding.

The welding filters are designed with high optical quality, including
uniform dimming and minimal distortion of the entire visual filter area.

Clear protective coating provides visibility and protection when welding.

The single-stage reducing valve for Nitrogen is a regulator without variable regulation of the output pressure.

One-stage reducer valve with nominal inlet pressure 200 bar, with adjustable outlet pressure.

Single stage reducer valve with nominal inlet pressure 200 bar with adjustable outlet pressure.

Single stage, for MIG/MAG and TIG welding.

Inner diameter: 6.8mm;
Temperature range: -15C to +60C;

Size f6/f8mm
Rubberized with braid
Serves for CO2 and argon supply

Size (LxWxH): 1280x550x885mm
Size of the top tray: 91.5x46x3.4cm
Size of the bottom tray: 90.5x45x3.5cm
Size of small tool stand: 45x9cm
Dimensions of a large tool holder: 45x27.5cm
Gross weight: 22kg
Carton size: 95x50x10cm

Overall Size, (LхHхW): 1,000x720x420mm, (including axle)
Size of top tray, (LхW): 700x275mm

Includes 2 gas bottle chains and 2 lead/cable hanger hooks.

Trolley load capacity [kg] 70
Weight [kg] 10.7
Dimensions (L x W x H) [cm] 710 x 400 x 875

Angle values ​​°: 30°, 45°, 60°, 75°, 90°, 135°

Angle values: 45°, 90°, 135°

Pliers with a special shape, for use in MIG/MAG welding.

Hammer with anti-shock handle to reduce vibrations transmitted to the hand when removing slag

The slag hammer is made of special high-quality steel and has a user-friendly handle.

Handle for holding electrodes during welding.

Up to 300 A current.

Handle for holding electrodes during welding.

Up to 200 A current.

Sizes: Ø 1.6, 2.0, 2.4mm
Wire for TIG welding and repair of details, sheets and profiles from aluminum-magnesium alloys.