Dowels

Installation: in solid foundations (concrete, stone, solid brick) and partially good in cavities.

Concrete, cracked concrete, friable concrete, stone, hollow brick and solid brick.

Insulation anchors for concrete, for high loads. Suitable for fixing thermal insulation boards made of EPS and XPS. Various sizes.

Fischer DuoPower is an intelligent 2-component anchor with three product functions (expansion, clamping, connection). It is suitable for fixing in all building materials. Fischer DuoPower automatically adjusts to the building material and transfers high loads through the three functions of folding, expansion and knotting. The excellent connection with the anchor when screwing in the screw generates additional security. The sizes 6 x 50, 8 x 65 and 10 x 80 are particularly suitable for fastening in hollow building materials, aerated concrete and bridge plaster due to their greater anchoring depth,

The Fischer DuoBlade dowel is part of the innovative Fischer DuoLine and consists of various components that allow for the best possible performance. The self-drilling metal tip ensures clean and efficient drilling. It can be used with wood, metal and chipboard screws with a diameter of ø04.0 to ø5.0 mm, and for plasterboard, pre-drilling with a Ø8 mm drill bit is recommended.

Thanks to its 4-way expansion, the FISCHER SX Plus anchor is ideal for hard building materials such as concrete, brick and masonry. The special teeth ensure that the screw is pre-fixed, so it does not need to be held in place when used overhead. The edge of the anchor prevents it from sliding deeper into the hole. The high-quality nylon material guarantees a long-lasting secure hold in a wide range of hard and perforated building materials.

Special dowel for various fastenings in aerated concrete. Ideal for fastening facade and roof structures, as well as for aerated concrete railings, cable trays, pipelines, guard rails.

​The Fischer GK plasterboard dowel is made of high-quality nylon. It is screwed into a pre-positioned installation. It holds, creating the perfect shape to fit into. The short fixing length means that only a small space is needed behind the board. The Fischer GK can be used with wood, sheet metal and chipboard screws with a thickness of 4 to 5 mm. It is suitable for fixing lighting and electrical installations.

Spiral plasterboard dowel with a diameter of 13 mm and a support ring
Fischer GKM metal plasterboard dowel with a size of 13 x 35 mm.
It can fasten screws for wood, sheet metal and chipboard with a thickness of 4 to 5 mm. It is universally suitable for secure and quick fastening, for example, of lighting fixtures, electrical installations and the installation of accessories.

The Fischer fixing set allows for quick and easy installation of water heaters. It is suitable for installation in concrete, solid brick, as well as load-bearing walls.
Its specially designed shape prevents the dowel from turning in the hole.

The FISCHER S 8 RD 80 WCR toilet, sink and bidet set consists of a dowel, screw with bolt, sleeve and nut. The collared alignment sleeve prevents direct contact between the ceramic and the screw, thus protecting the ceramic from scratching, breaking or other damage. The UX dowel is suitable for all solid and hollow building materials. The material from which the dowel is made is high-quality, age-resistant nylon.

Fischer FIS AB 300 T injection resin is a high-quality product designed for reliable and strong fastening in concrete and masonry. This resin provides excellent adhesion and long-term load resistance, making it ideal for professional construction and renovation work.
The resin is easy to apply, and its fast hardening ensures a secure fastening. When the fastener is placed, the solution is pressed by the mesh structure of the anchor sleeve and fits optimally to the substrate.
Partially used canisters can be reused by replacing the static mixer.

The Fischer FIS H chemical anchor plug is a cost-effective system component for using injection mortars in perforated brickwork. The anchor sleeve is cut to size, inserted into the drilled hole and filled with injection mortar. When fixing, the mortar is pressed through the grid structure and then connected to the perforated brick by interlocking.
Its advantage is that the grid structure allows for an even distribution of the mortar in the drilled hole and a secure hold.

The SXRL T frame anchor set with cone head screw is the ideal solution for strong and reliable fastening in various building materials. This set includes a high-quality anchor and screw, which ensure maximum stability and durability of the fastening. The anchor is made of corrosion-resistant material, making it suitable for indoor and outdoor use. The cone head of the screw allows for easy and secure tightening, while providing an aesthetic finish to the installation.

Complete fixing set for quick and easy installation of washbasins and urinals. Consists of two universal fixings UX 14x75, two screws M10x140 mm, two hexagon nuts M10 and two sleeves. The Fischer UX universal fixing without edge is suitable for pre-positioned and sliding installation - in all solid, hollow and flat building materials.Complete fixing set for quick and easy installation of washbasins and urinals. Consists of two universal fixings UX 14x75, two screws M10x140 mm, two hexagon nuts M10 and two sleeves. The Fischer universal fixing UX without edge is suitable for pre-positioned and sliding installation - in all solid, hollow and flat building materials.

The Fischer fixing set allows for quick and easy installation of water heaters. It is suitable for installation in concrete, solid brick, as well as load-bearing walls.
Its specially designed shape prevents the dowel from turning in the hole.